How to turn on the heating in an inverter air conditioner: analysis of hot topics on the Internet and operation guide
Recently, as the temperature drops sharply, the heating function of inverter air conditioners has become a hot topic on the Internet. The following is the popular search data and operation guide in the past 10 days (as of December 2023) to help you use the heating function of the inverter air conditioner efficiently.
1. Data statistics on hot topics across the entire network
| Hot search keywords | Search volume (10,000 times/day) | Main discussion platform |
|---|---|---|
| Inverter air conditioner and heating | 18.5 | Baidu, Zhihu |
| Does turning on the air conditioner and heating cost electricity? | 12.3 | Xiaohongshu, Douyin |
| Variable frequency vs fixed frequency heating | 9.7 | Station B, Home Appliances Forum |
| Air conditioner defrost problem | 7.2 | Weibo, Tieba |
2. Operation steps for turning on the heating of an inverter air conditioner
1.Boot preparation: Make sure the air conditioner is powered on and the remote control battery has sufficient power.
2.Mode selection: Press the "Mode" button on the remote control to switch to"Heating"Mode (usually shown as a sun icon).
3.Temperature setting: It is recommended to set it to20-24℃Between 1°C and 1°C, power consumption increases by approximately 6%.
4.Wind speed adjustment: Initial recommendation is to turn onhigh speed wind, it can be adjusted to automatic mode after the room temperature rises.
3. Solutions to common problems
| Problem phenomenon | Cause analysis | Solution |
|---|---|---|
| Cold air blows out but no heating | The system is preheating (about 3-5 minutes) | Wait for preheating to complete |
| Frequent downtime | The outdoor temperature is lower than -7℃ | Turn on the electric heating function |
| Noisy operation | Compressor runs at high frequency | It's normal |
4. Power saving tips and precautions
1.Clean the filter regularly: Cleaning once a month can increase heating efficiency by 15%.
2.Proper use of electric auxiliary heating: This function can be turned off when the outdoor temperature is >0℃.
3.Avoid frequent switching: Continuous operation of the inverter air conditioner saves more power.
4.Best time to use: It is recommended to use it during low electricity prices (such as 22:00-8:00 the next day).
5. Comparison of technical parameters (mainstream brands)
| Brand model | Applicable area | Heating power(W) | Low temperature working ability |
|---|---|---|---|
| Gree KFR-35GW | 15-20㎡ | 1200 | -15℃ |
| Midea KFR-26GW | 10-15㎡ | 950 | -20℃ |
| Haier KFR-50LW | 25-30㎡ | 1800 | -10℃ |
6. Expert advice
1. Before using the heating function for the first time, it is recommended toSystem self-test(Press and hold the "function key" on the remote control for 5 seconds).
2. In extreme low temperature environments, it should be coordinatedOil or floor heatingUse.
3. Pay attention when purchasingAPF energy efficiency ratio(It is recommended to choose a 4.5 or above model).
Through the above structured data and operation guide, I believe you can use the heating function of the inverter air conditioner more scientifically. If you need further help, it is recommended to consult the brand’s official after-sales service.
check the details
check the details
en
